HOW TO USE - In 4 Simple Steps

CLEAN THE SURFACE

To ensure a secure hold prepare the surface before applying Bondic®. Ensure all oils are removed from the surface. Rough up the surface with a file or sandpaper. This will create groves and allow the Bondic® Liquid Plastic to fill those groves and create a microscopic mechanical bond with the surface. 

FILL WITH BONDIC®

Apply thin layers of Bondic® Liquid Plastic in the space using the applicator tip. By Applying Bondic® in thin layers, curing then repeating, the hold will become more secure.

CURE WITH THE LED

After applying the Liquid Bondic® shine the UV Light on the Liquid Plastic. Hold the Light over the Liquid Bondic® for 4 seconds to harden. No pressure is needed, Bondic® doesn't harden with air and pressure like regular glue. Bondic® only hardens under the UV light. Making it special and unique.

SHAPE TO DESIRED OUTCOME

Use a Shaping tool to file down any unwanted hardened plastic. You can Shape, Paint, Vanish, or Colour the hardened plastic in any way you desire.

Links:

• Bondic PDF Instructions
• Bondic Instructional Video